Clean Sweep Chimney Service

Tuesday, July 30, 2013

Milwaukee Chimney Cleaning Services

 It may be hot outside but your going to be using that fireplace and chimney soon.  Call now for a chimney cleaning in Milwaukee.  Chimney Sweeps in Milwaukee come and go, Phil has been serving the Milwaukee area for over 15 years.
Over 40,000 chimney fires occur every year.
  1. More than $23,000,000 in damage occurs  every year from chimney fires.
  2. CREOSOTE is a black or dark brown substance with a strong acrid odor that forms in a wood burning chimney. It has a consistency from tar like to runny. It is essentially pure carbon, with a gooey covering.
  3. Carbon has a very high flaming point.
  4. Creosote continues to build up on chimney surfaces as more wood is burnt.
  5. If CREOSOTE builds up to a point where it clogs or greatly restricts a chimney, the outer coating of the CREOSOTE could catch fire which would ignite the carbon in the creosote. THIS IS ACHINMEY FIRE.
  6. Normal flue temperatures for wood burning is between 200° - 700°F. Carbon burns in excess of 3000°F.
  7. Stovepipes have literally torn apart by the combination of heat and the force of the increased oxygen demand of burning CREOSOTE.
  8. Burning wood can be and is very safe and economical if done properly.
  9. Insurance statistics show that a vast majority of wood stove related accidents are a result of either improper installation or a lack of proper maintenance.
  10. CREOSOTE cannot be entirely prevented but you can prevent dangerous buildups.
  11. Never burn trash and bundles of paper such as Christmas wrapping paper in a stove or fireplace.
  12. If you have a wood stove or fireplace insert, NFPA 211 states that you shall have it cleaned and inspected every year.
  13. You can pray to St. Florian. He is the patron saint of Chimney Sweeps.
  14. In German Chimney Sweep is “Schontinfeger”.
  15. Clean Sweep Chimney Service has been in business since 1979.
  16. Both Bud and Brian Hinchman are certified by CSIA (Chimney Safety Institute of America) and are members of NCSG (National Chimney Sweep Guild).
Folklore and Superstition
  1. An English King was once saved from death by a Chimney Sweep when the sweep was able to jump out and stop the King’s runaway carriage. The King announced that this was his lucky day and that the sweep made it so. From that day on, many lucky things were associated with a Chimney Sweep.
  2. If you see a Chimney Sweep atop a house, that house will be blessed.
  3. If you shake the hand of a Chimney Sweep or touch his coat, good luck will rub off on you.
  4. If a Chimney Sweep kisses the bride and shakes the hand of the groom it will bring a happy marriage and a fertile union.
  5. Wearing a top hat brings good luck.
  6. Children used to steal a few bristles from a Sweep’s brush and carry them for luck.
  7. It’s good luck to kiss a sweep.
  8. It is an old wives tale that once a chimney fire has occurred, the chimney is cleaned or burned clean. NOT TRUE.
  9. Another NOT TRUE, is that burlap bags with rocks in them or chains will clear a chimney of CREOSOTE. They just can’t do the job.
  10. One theory of the top hat and tails, is that sweeps were so poor, that they had to beg for clothing. When wealthy undertakers gave the Sweeps their cast offs, the black coat and hat suited the Sweeps fine in their sooty job.
  11. Another theory of the top hat and tails is that poor sweeps were at the bottom of the European society so they began wearing the top hat and tails to try to upgrade and dignify their profession.
  12. In Germany, if a black cat crosses your path, hold your coat button until you see a Chimney Sweep. Lots of buttons were pulled off waiting for the sight of a Chimney Sweep.
  13. Chimney Sweeps used to “BUY”  thin boys to be a “chimney climbers”. The Sweep would tie a rope around the boy and lower him into the chimney with a brush to clean the chimney.
  14. A  goose was tied by it’s feet with a rope and lowered into a chimney to clean it.

Clean Sweep Chimney Service is located in Milwaukee Wi,  If you need Chimney repair or Chimney Cleaning Call us at (414) 483-9996. Our Website is at http://cleansweepchimney.vpweb.com

Wednesday, July 10, 2013

Milwaukee Chimney Repair

Nice article about chimney Damage causes for my Milwaukee Chimney Repair customers. 

The fact that chimneys may do their job reasonably well, even when abused or neglected, contributes to this atmosphere of indifference. Chimneys are far from the passive black holes that most people assume them to be. They perform several vital functions, and their simple appearance misrepresents their complex construction and performance requirements. A chimney deteriorated by constant exposure to the weather can be a potential safety hazard. Weather-damaged lining systems, flue obstructions and loose masonry materials all present a threat to residents. Regular chimney maintenance is essential to prevent damage, deterioration and future high-cost chimney repairs.

Masonry Chimneys
A masonry chimney is constructed of a variety of masonry and metal materials, including brick, mortar, concrete, concrete block, stone, flue tile, steel and cast iron. All masonry chimneys contain combinations of, or possibly all of, these materials, most of which are adversely affected by direct contact with water or water penetration.

Water Penetration
All masonry chimney construction materials, except stone, will suffer accelerated deterioration as a result of prolonged contact with water. Masonry materials deteriorate quickly when exposed to the freeze/thaw process, in which moisture that has penetrated the materials periodically freezes and expands causing undue stress. Water in the chimney also causes rust in steel and cast iron, weakening or destroying the metal parts.

Note: While most stone is not affected by water penetration, large amounts of mortar are required to bond the stone together properly. Therefore, a stone chimney – just like a brick chimney – should be protected from the effects of water penetration.

Water penetration can cause interior and exterior damage to your home and masonry chimney including:
• Rusted damper assemblies
• Deteriorated metal or masonry firebox assemblies
• Rusted fireplace accessories and glass doors
• Rotting adjacent wood and ruined wall coverings
• Water stained walls and ceiling
• Clogged clean out area
• Deteriorated central heating system
• Stained chimney exterior
• Decayed exterior mortar
• Cracked or deteriorated flue lining system
• Collapsed hearth support
• Tilted or collapsed chimney structure
• Chimney settlement

In addition, when water mixes with creosote in a wood burning chimney system, it will generate a highly disagreeable odor that can permeate a home.
Preventing Water Damage
Chimney caps, also called rain covers, are probably the most inexpensive preventive measure that a homeowner can employ to prevent water penetration and damage to the chimney. Chimney caps have long been recognized as an important chimney safety and damage prevention component. Underwriters Laboratories (UL) specifies that any chimney lining system that is to be listed to their test standard must include a chimney cap.
Chimneys have one or more large openings (flues) at the top that can collect rainwater and funnel it directly to the chimney interior. A commonly-sized flue has the potential to allow large amounts of rain or snow into the chimney during just one winter when freeze/thaw cycles are common.

Chimney caps also provide other benefits. A strong, well-designed cap will prevent birds and animals from entering and nesting in the chimney. Caps also function as spark arrestors, preventing sparks from landing on the roof or other nearby combustible material.
A chimney cap should be easily removable to facilitate inspection and cleaning. For a long and effective service lifetime, a cap should be constructed of sturdy, durable and corrosion resistant material. Caps may be designed to cover a single flue, multiple flues, a large portion of the chimney or the entire chimney top. A full coverage chimney cap usually represents a larger initial investment. However, it is probably the best investment for long-term protection because of its ability to protect the entire chimney crown.

Repair or Replace a Damaged Chimney Crown
The chimney crown (also referred to as the chimney wash) is the top element of a masonry chimney. It covers and seals the top of the chimney from the flue liner to the chimney edge. The crown should provide a downward slope that will direct the water from the flue to the edge of the crown. The overhanging drip edge, by directing the run-off from the crown away from the chimney, helps prevent erosion of the brick and mortar in the chimney’s vertical surfaces.
Most masonry chimneys are built with an inadequate crown constructed from common mortar mix that is designed for years of weather abuse without cracking, chipping or deteriorating. A proper chimney crown should be constructed of a Portland cement-based mixture and cast or formed so it provides an overhang projecting beyond all sides of the chimney by a minimum of two inches. The flue liner tile should also project above the crown a minimum of two inches.

Repair Deteriorated Mortar Joints
Deteriorated mortar joints on the chimneys exterior are entry spots for water. Proper mortar joints have no gaps or missing mortar and are shaped in a way that directs water out of the joint. When mortar deteriorates from exposure to weather, it becomes much more absorbent. A common repair for deteriorated mortar joints is called repointing. In this process, the existing mortar joint is cut to an appropriate depth and the joint is repacked with new mortar. The joint is then cut to form a concave surface that will direct water out of the joint. A good repointing job, using proper materials, will give the chimney a much longer life span, and often will enhance its appearance.
Repair or Replace Flashing
Flashing is the seal between the roofing material and the chimney. Flashing prevents rainwater or snow melt from running down the chimney into living spaces where it can damage ceilings and walls and cause rot in rafters. The flashing is the expansion joint between two dissimilar materials. It is designed to allow both the roof and the chimney to expand and contract at their own rates without breaking the waterproof seal in either area.

Install a Cricket to Stop or Prevent Leaks
If the chimney is located on the low side of the roof where water run-off is directed against the chimney, the installation of a cricket will afford additional protection against water leaking into the home. A cricket is a water deflector that serves to direct rainwater away from the chimney. Crickets are recommended on chimneys more than 30-inches wide and they are especially important on steep roofs.

Waterproof Your Chimney
Most masonry materials are porous and will absorb large amounts of water. Common brick is like a sponge, absorbing water and wicking moisture to the chimney interior. Defective mortar joints or the use of improper mortar or brick can greatly increase the tendency to absorb and convey water to the interior of the masonry chimney.

Several products have been developed specifically for use as waterproofing agents on masonry chimneys. These formulas are 100% vapor permeable, which means that they allow the chimney to breathe. Therefore, water that has penetrated and the vapors produced when the chimney dries out or the water vapors produced during use are allowed to escape, while the waterproofing agent prevents water from entering from the outside. These products usually have a five- to ten-year warranty. Paint or clear sealers should never be used as a waterproofing agent because they will trap water vapors and moisture inside the chimney causing further deterioration.

Waterproofing is a preventive measure. When damage or deterioration (gaps, voids, cracks, missing mortar, etc.) already exists in a masonry structure, the chimney should be repaired before the waterproofing agent is applied. The chimney exterior may also need to be cleaned before the waterproofing material is applied.
- See more at: http://www.csia.org/homeowner-resources/water_and_your_masonry_chimney.aspx#sthash.uI451wAZ.dpuf
Clean Sweep Chimney Service is located in Southeastern Wisconsin and services Milwaukee, Waukesha, Slinger, and the entire Southeastern Wisconsin area. If you need Chimney repair or Chimney Cleaning Call us at (414) 483-9996. Our Website is at http://cleansweepchimney.vpweb.com

Clean Sweep Chimney Service

Clean Sweep Chimney Service specializes in Chimney Cleaning and Chimney Repair. We are located in Southeastern Wisconsin and service Milwaukee, Waukesha, Slinger, and the entire Southeastern Wisconsin area. If you need Chimney repair or Chimney Cleaning Call us at (414) 483-9996.

Click here for our website